With Kolarc MX 600 Synergic technology, you can obtain high quality welding outputs with optimized welding characteristics. Thanks to its very stable arc control, it reduces spatter by 30% and post-weld cleaning by 70%.
Easy to Use Kolarc MX 600 Synergic
Kolarc MX 600 Synergic's unique hardware is easily and easily commissioned in just 10 minutes. The ergonomic buttons of the wire feeder can be operated effortlessly even with welding gloves on.
Thanks to its effortless and easy-to-use steps, it saves your “valuable” working time in every field it is used.
Perfect start with Kolarc MX 600 Synergic
In Kolarc MX 600 Synergic power units, the wire contacts the workpiece with a lower wire speed than the set one. Optimum ignition parameters are applied according to wire type, diameter and gas type. Provides an excellent arc start that reduces contact head waste and prevents spatter.
Smart power supply
Kolarc chamfered MX power supplies prevent caking at the wire end of the weld. The digital welding process arrangement ensures constant arc length penetration at different free wire distances. The wire actively adjusts the supply to keep the welding current constant in all situations.
Optimized arc control
Weld high quality with the stable arc control and precision ignition of the Kolarc MX 600 Synergic. Available as standard on all models. Minimizes spatter, reducing your need for finishing. Arc control can be optimized with optional welding programs.
Deep weld penetration
Kolarc Xdeep/Xdeep Pulse solutions offer excellent welding performance with virtually zero reduced burr formation and reduced edge chamfers. It provides a flat weld surface and symmetrical weld seam, even on heavily oxidized or contaminated sheets. With the advantages it provides, the workload of the welder is lightened and you save valuable time.
Uniform weld quality
The XSstable welding solution enables a very narrow, high-energy welding arc to be produced, speeding up the welding process and reducing heat input. It provides a uniform welding quality in your welding process with its constant penetration depth regardless of the change of the free wire tip.
Eliminate high heat input
Thanks to its high speed inverter power unit, the XCold welding solution helps you stay in control of welding applications where excessive heat adversely affects the weld pool stability and causes joint breakage. It allows you to work with a flat, smooth weld surface and almost zero burrs.
High-yielding root source
XRoot increases welding speed with energy-reduced short arc welding compared to standard arc welding. The process can be used on different types of materials such as steel, stainless steels and high alloy steels. It provides excellent gap bridging with high arc pressure for root welding in any position.
High feed rate, low heat input
Current control in conventional machines is slower and choked due to large transformer. Kolarc MX 600 Synergic machines with inverter technology provide high forward speed and low heat input by rapidly reducing the current during droplet transfer.