Note: The prices shown here are retail sales prices. SPECIAL DISCOUNT MAY APPLY FOR BULK PURCHASES . Additionally, discounted prices offered to dealers may differ.
Import duties, customs charges, and value-added taxes for products originating outside of Turkey are not included in the listed prices. This is applicable to customers purchasing from within Turkey.
The prices mentioned here do not include door-to-door delivery. Buyers purchasing from other countries are responsible for customs duties and any other taxes applicable under their local commercial laws.
For orders under 13,000 Euros, if the product value is below this, the total order value must either reach 13,000 Euros or a 150 Euro customs fee will be added to your final invoice value.
3080
1.2 / 1.0
3775x795x1215
Minimum fold width = 15 times the thickness
Guiding rail, reference RZX2040MA, for workshop manual folding machine PZX2040. Hinged device at the front of the folding machine intended to use the CCMA roller shear for the scribe cuts of material before folding
Roller shear, reference CCMA, 0.8mm zinc capacity, 0.7mm steel capacity, to cut the material on manual folding machines. Roller shear to be used on a guiding rail only
3-position aluminium geared-down beading accessory with 14, 16 or 18mm Ø stick (Ø to specify at the order), reference ABAL2040V, 0.65mm zinc capacity for a 14mm Ø stick and 0.80mm for a 16 and 18mm Ø stick. Gear reduction system to make very regular beads without effort. Used with the PVX folding machines
Extra 14mm Ø stick, reference BAH14-2040, for geared-down beading accessory ABAL2040. Used for PCA, PCX, PZX and PVX folding machines in 2-meter lengths
Extra 16mm Ø stick, reference BAH14-2040, for geared-down beading accessory ABAL2040. Used for PCA, PCX, PZX and PVX folding machines in 2-meter lengths
Extra 18mm Ø stick, reference BAH16-2040, for geared-down beading accessory ABAL2040. Used for PCA, PCX, PZX and PVX folding machines in 2-meter lengths
xtra narrow folding beam tool, length 2040mm, width 12mm, reference PVX-REG12-2040, for folding machines models PVX2040 and PVX2040T. NB: more the tool is narrow, less the machine folding capacity is important (Capacity: -30% compared to the 15mm standard tool)
Extra folding beam tool, length 2040mm, width 20mm, reference PVX-REG20-2040, for folding machines models PVX2040 and PVX2040T. NB: more the tool is wide, more the machine folding capacity is high (Capacity: +20% compared to the 15mm standard tool)
Back table, reference ETBX2040C, for folding machine PCX2040A, gauge from 45 to 1000mm. Back table equipped with orientable tool over the whole length to abut the metal sheet easily acc. to the desired dimension before cutting or folding
Back gauge with belt, reference PZXBC2040, from 5 to 750mm for folding machine model PZX2040. Gauge with lateral control by wheel and adjustable by digital counter, equipped with 4 repositionable fingers over the length
Extra rotating gauge finger, reference DOIGT-PVX-BC-ROT for back gauge with belt PVXBC and PZXBC. Adding one or several extra gauge fingers provides a better back holding of the metal sheet and improves its whole positioning against the gauge. Easy relocation of the gauge fingers acc. to the metal sheet format
Set of 2 back gauge arms with slide type X, reference PCXB2040, adjustable from 40 to 510mm, for manual folding machines PCX2040A and PZX2040. The gauge arms slide on the fixing rail at the back of the machine and are stopped in position. Possible positioning of the metal sheet as per the desired dimension as well as its back support
Extra back gauge arm with slide type X, reference PCXBS2-2.5, adjustable from 40 to 510mm. Adding an extra gauge arm provides a better back holding of the metal sheet on large lengths and improves positioning before cutting or folding
Internet Explorer tarayıcısının 9.0 ve daha eski sürümlerini desteklememekteyiz. Web sitemizi doğru görüntüleyebilmek için tarayıcınızı güncelleyebilirsiniz, güncelleyemiyorsanız başka bir tarayıcıyı ücretsiz yükleyebilirsiniz.