Note: The prices shown here are retail sales prices. SPECIAL DISCOUNT MAY APPLY FOR BULK PURCHASES . Additionally, discounted prices offered to dealers may differ.
Import duties, customs charges, and value-added taxes for products originating outside of Turkey are not included in the listed prices. This is applicable to customers purchasing from within Turkey.
The prices mentioned here do not include door-to-door delivery. Buyers purchasing from other countries are responsible for customs duties and any other taxes applicable under their local commercial laws.
For orders under 13,000 Euros, if the product value is below this, the total order value must either reach 13,000 Euros or a 150 Euro customs fee will be added to your final invoice value.
Minimum fold width = 15 times the thickness
Guiding rail, reference RCL1020MA for building site manual folding machine PCL1020A. Hinged device at the front of the folding machine intended to use the CCMA roller shear for the scribe cuts of material before folding
Roller shear, reference CCMA, 0.8mm zinc capacity, 0.7mm steel capacity, to cut the material on manual folding machines. Roller shear to be used on a guiding rail only
Beading accesory with 13mm Ø stick, reference BAL1020MAN, 0.65mm zinc capacity. Used with the building site manual folding machine PCL1020A only
3-position aluminium geared-down beading accessory with 14, 16 or 18mm Ø stick (Ø to specify at the order), reference ABAL1020, 0.80mm zinc capacity for a 14mm Ø stick and 1.0mm for a 16 and 18mm Ø stick. Gear reduction system to make very regular beads without effort. Used with the manual folding machine PCL1020A and PCX1020
Extra 14mm Ø stick, reference BAH14-1020, for geared-down beading accesory ABAL1020. Used for folding machines models PCL1020A, PCX1020 and beading machine BAG1020MD
Extra stick, 16mm diameter, reference BAH16-1020, for geared-down beading accesory ABAL1020. Used for folding machines models PCL1020A and PCX1020
Extra stick, 18mm diameter, reference BAH18-1020, for geared-down beading accesory ABAL1020. Used for folding machines models PCL1020A and PCX1020
Tool to close the seams, reference OFP-180, to make hems at 180° from a seam at 135°, 0.8mm steel capacity
Roller offsetting tool, reference OSRA, for use on the guide rails of Jouanel Industrie folding machines. For ribbing flat sheet metal, with or without hollow joints, to create underside cladding, cladding profiles, dormer cheeks or to reinforce the rigidity of sheet metal, steel capacity 0.8mm
Internet Explorer tarayıcısının 9.0 ve daha eski sürümlerini desteklememekteyiz. Web sitemizi doğru görüntüleyebilmek için tarayıcınızı güncelleyebilirsiniz, güncelleyemiyorsanız başka bir tarayıcıyı ücretsiz yükleyebilirsiniz.