Note: The prices shown here are retail sales prices. SPECIAL DISCOUNT MAY APPLY FOR BULK PURCHASES . Additionally, discounted prices offered to dealers may differ.
Import duties, customs charges, and value-added taxes for products originating outside of Turkey are not included in the listed prices. This is applicable to customers purchasing from within Turkey.
The prices mentioned here do not include door-to-door delivery. Buyers purchasing from other countries are responsible for customs duties and any other taxes applicable under their local commercial laws.
For orders under 13,000 Euros, if the product value is below this, the total order value must either reach 13,000 Euros or a 150 Euro customs fee will be added to your final invoice value.
Guiding rail, reference RCA2040MA for building site manual folding machine PCA2040. Hinged device at the front of the folding machine intended to use the CCMA roller shear for the scribe cuts of material before folding
Roller shear, reference CCMA, 0.8mm zinc capacity, 0.7mm steel capacity, to cut the material on manual folding machines. Roller shear to be used on a guiding rail only
Tool to close the seams, reference OFP-180, to make hems at 180° from a seam at 135°, 0.8mm steel capacity
Roller offsetting tool, reference OSRA, for use on the guide rails of Jouanel Industrie folding machines. For ribbing flat sheet metal, with or without hollow joints, to create underside cladding, cladding profiles, dormer cheeks or to reinforce the rigidity of sheet metal, steel capacity 0.8mm
3-position aluminium geared-down beading accessory with 14, 16 or 18mm Ø stick (Ø to specify at the order), reference ABAL2040, 0.65mm zinc capacity for a 14mm Ø stick and 0.80mm for a 16 and 18mm Ø stick. Gear reduction system to make very regular beads without effort. Used with the manual folding machine PCX2040A, PCA2040 and PZX2040
Extra 14mm Ø stick, reference BAH14-2040, for geared-down beading accessory ABAL2040. Used for PCA, PCX, PZX and PVX folding machines in 2-meter lengths
Extra 16mm Ø stick, reference BAH16-2040, for geared-down beading accessory ABAL2040. Used for PCA, PCX, PZX and PVX folding machines in 2-meter lengths
Set of 2 back gauge arms with slide type X, reference PCAB2040, adjustable from 55 to 510mm for manual folding machine PCA2040. The gauge arms slide on the fixing rail at the back of the machine and are stopped in position. Possible positioning of the metal sheet as per the desired dimension as well as its back support
Extra back gauge arm with slide type X, reference PCABS2, adjustable from 55 to 510mm for manual folding machine PCA2040. Adding an extra gauge arm provides a better back holding of the metal sheet on large lengths and improves positioning before cutting or folding
Internet Explorer tarayıcısının 9.0 ve daha eski sürümlerini desteklememekteyiz. Web sitemizi doğru görüntüleyebilmek için tarayıcınızı güncelleyebilirsiniz, güncelleyemiyorsanız başka bir tarayıcıyı ücretsiz yükleyebilirsiniz.